Kuhtreiber
Rodoma 1–24 iš 124
-
-
-
Eksploatacines medžiagos
Kuhtreiber BASIC suvirinimo elektrodai
Use
Low hydrogen basic electrode for welding high tensile strenght steels.
Construction steels S235 – S355
Boiler plates P235GH – P355GH
Pipe steels P235 – P355N
Shipbuilding plates A, B, D, E, AH32 – EH36
Fine grained steels S275 – S420Composition
C 0,08 | Si 0,60 | Mn 1,00
Mechanical properties
500-640 N/mm² tensile strength Rm
420 N/mm² yield strength Rp 0,2%
>22% elongation A5SKU: basic_electrodes -
MMA inverteriai
Kuhtreiber FĒNIX 160
MMA|TIG
10-150 ASingle-phase portable undervoltage inverter for welding by MMA and TIG method.
FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length). Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.
SKU: 51225 -
MMA inverteriai
Kuhtreiber FĒNIX 200
MMA|TIG
10-190 ASingle-phase portable undervoltage inverter for welding by MMA and TIG method.
FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length). Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.
SKU: 51347 -
MMA inverteriai
Kuhtreiber FĒNIX 200 PFC
MMA|TIG
10-200 ACompact, portable, under-voltage welding machine for MMA and TIG welding, which is equipped with PFC (Power Factor Correction).
FĒNIX is equiped by high-tech using energy-saving inverter microprocessor technology PFC with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine. PFC technology ensures stable welding process with fluctuating voltage of electrical network, even when using long extension cables or using electric generators, without any apparent difference in the arc. The machine is able to operate from 90 V in electrical network. FĒNIX 200 PFC is able to work of the same protection from the network and to get against conventional welding machines up to 40% more power (eg. where the machine ejects the fuse at 150 A, FĒNIX 200 PFC welded without problems on current of 200 A).
The machine has a function to limit the output current by which one can work with the machine in low protection in the network. FĒNIX PFC is predestined for use on generator, long extension cable and using the weak breakers.
FĒNIX 200 PFC provides excellent arc stability, simple and easy to understand controls, remote control options, performance and equipment. Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Welding machine FĒNIX 200 PFC is designed for the most demanding users.SKU: 51348 -
TIG AC/DC inverteriai
Kuhtreiber FĒNIX 250 PFC AC|DC
MMA|TIG
10-250 A
1-PHigh powered professional portable undervoltage AC/DC welding machine, designed for very high quality welding of aluminium, CrNi, steel and special materials using TIG and MMA methods.
It is a fully digitally controlled welding machine with PFC (Power Factor Correction) technology. This ensures a stable welding process without any change to the welding arc even despite fluctuations in the power supply, using long extension leads and using power generators. The machine is capable of working at voltages of 90 V (60 % under-voltage) in the electrical supply. The FĒNIX 250 PFC AC/DC boasts excellent stability of the welding arc, simple and easy-to-understand control, high performance and wide range of accessories. Remote control may be connected to the machine. The welding machine FĒNIX 250 PFC AC/DC is designed to suit the most demanding users.
SKU: 51322 -
-
-
Vielos padavimo įrenginiai
Kuhtreiber KIT 2-4 P
Removable wire feeder with all-metal cover of the wire feeder and the wire coil. Integrated control panel for griping of all function of machine. However, the machine is of robust construction and therefore it is intended for heavy load operations.
SKU: kit_2-2_P_2-4_P -
Vielos padavimo įrenginiai
Kuhtreiber KIT 2-4 P W
Removable wire feeder with all-metal cover of the wire feeder and the wire coil. With the installation of the liquid-cooled torch. Integrated control panel for griping of all function of machine. However, the machine is of robust construction and therefore it is intended for heavy load operations.
SKU: kit_2-2_P_W_2-4_P_W -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 205
MIG
40-190 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 205 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_205 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 2200
MIG
40-190 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 2200 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 10-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
SKU: kit_2200 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 225
MIG
30-195 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 225 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_225 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 2400
MIG
30-215 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 2400 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 10-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
SKU: kit_2400 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 245
MIG
30-195 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 245 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_245 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 3000
MIG
30-250 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 3000 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 10-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
SKU: kit_3000
