PROPERTIES AND EQUIPMENT
- excellent welding properties
- possibility of remote control connection
- thermal protection with light indicator
Methode MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. = MMA safety system; the maximum unloaded open circuit voltage across the output terminals is reduced to 15 V
- SOFT START MMA prevents outage of circuit breakers
- generator
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. = MMA safety system; the maximum unloaded open circuit voltage across the output terminals is reduced to 15 V
- SOFT START MMA prevents outage of circuit breakers
- generator
Methode MIG/MAG
- pregas / postgas
- Soft Start
- Burn Back
- Inductance
- Arc lenght
- Double pulse frequency
- Double pulse width
- Double pulse arc lenght
- Spool Gun
- 2-stroke / 4-stroke
- S4T (setting up a multi-step process)
- Remote control – UP/DOWN; 10k potentiometer
- Cooling modul
- Generator
- JOB MODE (allows to set up to 100 own welding programs)
- Gas test
- Wire feeding
- Spot welding
Methode TIG (DC)
- pregas / postgas
- DOWN SLOPE
- 2-stroke / 4-stroke
- Remote control – UP/DOWN; 10k potentiometer
- Cooling modul
- Generator
Input voltage 50/60 Hz | 3 x 400 V (±15 %) |
Fuse – slow | 20 A |
Welding current range | |
– MIG | 15 – 250 A |
– TIG/MMA | 10 – 250 A |
Power | |
– MIG | 7 kW |
– TIG | 5 kW |
– MMA | 8 kW |
Voltage at no load | |
– MIG | 80 A |
– TIG/MMA | 16 A |
Welding voltage range | 14 – 50 V |
Duty cycle 100 % (40 °C) | 195 A |
Duty cycle 60 % (40 °C) | 250 A |
Wire diameter | |
– Fe | 0.6 – 1.6 mm |
– stainless steel | 0.8 – 1.6 mm |
– tube wire | 0.6 – 1.6 mm |
– aluminium | 1.0 – 1.6 mm |
Efficiency | 85 % |
Protection | IP23 H |
Dimensions | 670 × 255 × 470 mm |
Weight of source unit | 26 kg |
Atsiliepimų dar nėra.