Kuhtreiber KITin 320 MMA
MMA
5-300 A
3-P
Three-phase portable digital inverters for welding by MMA method.
Portable welding machines KITin 320 MMA are designed as small, light and powerful digital three-phase inverters.
Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders. Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.
1,178.00€
CHARACTERISTIC AND EQUIPMENT
- Excellent welding properties
- High performance while maintaining compact dimension of the machine
- High power surplus
- Simple and intuitive machine control and parameters setting
- Digital controls for welding quality enhancement and simplification; ensures continuous readjustment of welding characteristics to actual conditions during the welding process
- Digital volt-ampere meter
- Fan on demand – the fan runs only when necessary – saving the energy consumption
- Remote control connector
- Massive and compact design
- Practical deposit box for welding cables and electrodes at the side cover
- ARC FORCE function for arc stabilization with the option of setting the intensity
- HOT START function for easier arc ignition
- DOWN SLOPE
- TIG LIFT ARC
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- V.R.D. and START CONTROL protection for assuring work safety
- DPC and SOFT POWER ON function for problem-free welding on a public electricity network
- It is possible to use rutile, basic and aluminum electrodes
| Input power 50/60 Hz | 3×400 V (± 10 %) |
| Protection – slow | 25 A |
| Duty cycle 100 % | 220 A |
| Duty cycle 40 % | 300 A |
| Output current range | 5 – 300 A |
| Maximum current | 380 A |
| Output voltage | 65 V |
| Ingress Protection | IP 23 S |
| Diameter of electrodes | 1.6 – 5.0 mm |
| Cable panel socket | 35–50 |
| Dimensions | 430 × 190 × 530 mm |
| Weight | 19 kg |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Panašūs produktai
-
MMA inverteriai
Kuhtreiber KITin 170 TIG LA
MMA|TIG
10-170 ASingle-phase portable inverter for welding by MMA and TIG method.
KITin 170 TIG LA is professional inverter welding machine of the third generation designed with the use of IGBT technology with the fast microprocessor regulation. Machines are noted with high duty cycle (125 A at 100%), performance and comfort controls. The controls of machine are integrated in the new generation of keyboard that replaces the standard mechanical solutions. This increases the the reliability and precision of machine setup.
SKU: kitin_170_tig_la -
MMA inverteriai
Kuhtreiber FĒNIX 200 PFC
MMA|TIG
10-200 ACompact, portable, under-voltage welding machine for MMA and TIG welding, which is equipped with PFC (Power Factor Correction).
FĒNIX is equiped by high-tech using energy-saving inverter microprocessor technology PFC with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine. PFC technology ensures stable welding process with fluctuating voltage of electrical network, even when using long extension cables or using electric generators, without any apparent difference in the arc. The machine is able to operate from 90 V in electrical network. FĒNIX 200 PFC is able to work of the same protection from the network and to get against conventional welding machines up to 40% more power (eg. where the machine ejects the fuse at 150 A, FĒNIX 200 PFC welded without problems on current of 200 A).
The machine has a function to limit the output current by which one can work with the machine in low protection in the network. FĒNIX PFC is predestined for use on generator, long extension cable and using the weak breakers.
FĒNIX 200 PFC provides excellent arc stability, simple and easy to understand controls, remote control options, performance and equipment. Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Welding machine FĒNIX 200 PFC is designed for the most demanding users.SKU: 51348
Atsiliepimų dar nėra.