Kuhtreiber KITin 1700 HF RS
MMA|TIG
10-170 A
Single-phase portable inverter for welding by MMA and TIG method.
KITin 1700 HF RS is the latest generation of inverter machines with higher performance, better parameters, new features and design. They are designed for industrial and professional use.
They are constructed with the use of high-frequency technology with fast regulation of welding current. Machines are characterized with high load factors (130 A at 100%) and performance, low electrical power consumption and excellent welding properties. They are lightweight, small size and mostly reliable. These machines are designed for operations where maximum utility value and high performance at a reasonable price are emphasized. Seamless welding on long extensions cables.
671.00€
FEATURES AND EQUIPMENT
- Excellent welding properties in MMA and TIG
- Processor control
- HF (High Frequency) non-contact start
- Up-Down remote control / potentiometer connector in the TIG torch handle
- Connector for remote control Up-Down / potentiometer for MMA methode
- Display showing set values
- Handle and strap for easy carrying
- Plexiglas control panel hinged cover
- Thermal protection with a signal light
- HOT START
- SOFT START
- ANTI STICK
- V.R.D.
- ARC FORCE
- BALANCE
- TIG HF
- PRE GAS / POST GAS
- TIG UP-DOWN SLOPE
- CYCLE
- PULSE (adjustable functions: I2, balance, frequency)
- 2-Stroke / 4-Stroke
| Input power 50/60 Hz | 1 x 230 V |
| Protection – slow | 20 A |
| Welding current range | 10 – 170 A |
| Duty cycle 100 % | 130 A |
| Duty cycle 60 % | 170 A |
| Duty cycle at max. I | 60 % |
| Mains current/input 60 % | 36 A / 8.28 kVA |
| Open circuit voltage | 95 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35 – 50 |
| Dimensions | 430 × 149 × 283 mm |
| Weight | 9.3 kg |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Panašūs produktai
-
TIG DC inverteriai
Kuhtreiber KITin 1500 HF
MMA|TIG
10-150 AWelding inverter with HF ignition for welding by TIG method.
KITin 1500 HF is inverter welding machine designed with the use of high frequency technology with the fast microprocessor regulation. Machines are fully equipped and designed for welding method TIG with touchless start HF (High Frequency). By using of method TIG welded stainless steel, copper and its alloys.
The controls of machine are integrated in the new generation of keyboard that replaces the standard mechanical solutions. This increases the reliability and precision of machine setup.SKU: 50113 -
TIG DC inverteriai
Kuhtreiber KITin 220 HF
MMA|TIG
5-200 A
3-PThree-phase portable digital inverters for welding by MMA and HF method.
Portable welding machines KITin 220 HF are designed as small, light and powerful digital threephase inverters.
Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.SKU: 51189
Atsiliepimų dar nėra.