Kuhtreiber KIT 3500
MIG
30-280 A
3-P
Compact three-phase MIG/MAG welding machines.
KIT 3500 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 20-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
1,208.00€ – 1,276.00€
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK (only PROCESSOR)
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x 400 V |
| Protection – slow | 25 A |
| Welding current range | 30 – 280 A |
| Output voltage range | 19.2 – 41.9 V |
| Duty cycle 100 % | 235 A |
| Duty cycle 60 % | 270 A |
| Duty cycle 40 % | 280 A |
| Mains current/input 60 % | 14.8 A / 10.6 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 20 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equiped roll | 1 – 1.2 mm |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 S |
| Dimensions | 902 × 510 × 890 mm |
| Weight | 88 kg |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Panašūs produktai
-
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 305 S
MIG|MAG
30-280 A
3×400 VThree-phase MIG/MAG welding machines with removable wire feeder.
KIT 305 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.SKU: kit_305_s -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KITin 2040 MIG EURO
MIG|MAG
20-150 A
1-PSingle-phase portable MIG/MAG inverter with euro connector.
KITin 2040 MIG EURO is small, lightweight and with the high efficiency. There is plastic handle to carry it. It is suitable to operate from generator (mobile power supply), for example for building. Machine allows easy settings of welding parameters.
SKU: 51147 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 225
MIG
30-195 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 225 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_225 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 405
MIG
30-350 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 405 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 8 programmes for standard steels (2 types of gas and 4 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_405
Atsiliepimų dar nėra.