Kuhtreiber KIT 309
MIG
30-250 A
3-P
Compact three-phase MIG/MAG welding machines.
KIT 309 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 10-grade voltage control, high power, high duty cycle, high reliability and easy operating.
867.00€ – 938.00€
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
- TEST GAS (only PROCESSOR)
| Input power 50/60 Hz | 3×400 V |
| Protection – slow | 16 A |
| Welding current range | 30 – 250 A |
| Output voltage range | 17.7 – 39.2 V |
| Duty cycle 100 % | 170 A |
| Duty cycle 60 % | 200 A |
| Duty cycle 30 % | 250 A |
| Mains current/input 60 % | 9.2 A / 6.4 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 10 |
| Digital volt-ampere meter | only PROC. |
| Wire feeder | 2-roll |
| Standard equip roll | 0.8 – 1.0 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 738 × 490 × 782 mm |
| Weight | 68 kg |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Panašūs produktai
-
Suvirinimo aparatai MIG/MAG
Kuhtreiber KITin 270 MIG
MIG|MAG
5-270 A
3-PThree-phase portable digital inverters for welding by MIG/MAG method.
Portable welding machines KITin 270 MIG are designed as small, light and powerful digital threephase inverters. Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.SKU: 51213 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 305 S
MIG|MAG
30-280 A
3×400 VThree-phase MIG/MAG welding machines with removable wire feeder.
KIT 305 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.SKU: kit_305_s -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 5000 WS STANDARD
MIG
50-450 A
3-PThree-phase MIG/MAG welding machine with removable wire feeder for heavy machinery production. It includes a liquid cooling circuit for a welding torch.
KIT 5000 WS are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 40-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
SKU: 51187 -
Suvirinimo aparatai MIG/MAG
Kuhtreiber KIT 305
MIG
30-280 A
3-PCompact three-phase MIG/MAG welding machines.
KIT 305 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 8 programmes for standard steels (2 types of gas and 4 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
SKU: kit_305
Atsiliepimų dar nėra.