PROPERTIES AND EQUIPMENT
- May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
- Optional use of up to 200 m (2.5 mm² cross-section) extension cable
- Enables welding when network voltage drops by as much as 40 % (from 140 V) using electrodes Ø 1.6; 2.0; 2.5 mm
- Connection of a remote control to regulate welding current
- Thermal protection with light indicator
- Under-voltage / over-voltage indicators
- Strap for easy carrying
Method MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. feature = MMA safety system; 15 V at output terminals in resting state
- SOFT START MMA prevents outage of circuit breakers
Method TIG
- Manual arc ignition – LIFT ARC
- PULSE
- PULSE FREQUENCY
- DOWN SLOPE (deceleration time on end current)
- END CURRENT
Input power 50/60 Hz | 1×230 V (-40%; +15%) |
Protection – slow | 20 A |
Welding current range | 10 – 190 A |
Duty cycle 100 % | 140 A |
Duty cycle 60 % | 155 A |
Duty cycle 15 % | 190 A |
Mains current/input 60 % | 19.5 A / 4.5 kVA |
Open circuit voltage | 88 V |
Ingress Protection | IP 23 S |
Cable panel socket | 35–50 |
Dimensions | 225 × 112 × 380 mm |
Weight | 4.7 kg |
Atsiliepimų dar nėra.